The control of the machine is only possible with the ISA- card. This is a Mikrostepcontrollercard, which is installed in a computer.
The software-pack includes the program OptimPro, which prepare the PLT- file and the program Foam Cut which controlled the machine. The client needs a PC with Windows 98.
Picture I.25 : Schematic construct from a computer controlled cutting table
With the Mobil Cutter you can cut exactly figures. It is main using in the industry of promotion, because that is fast to install and dismantling. That make possible that the machine is fast build up and ready for work at fairs and building site. You need only eight screws when you want assembly the machine. The Mobil cutter can cut 3D with materials like hard foam and XPS foam. This machine is easily built and operates, because that is perfect as a model for beginner.
Picture I.26: Mobil Cutter MC60
The Profi Cutter is delivered with machine, software pack, the wire- heating and the documentation.
Picture I.27: The outline about the standard accessories
With this machine you can cut 3.6 m³ in only one operation. The work- piece must not fix, so you can find the machines in the automobile industry, in the construction industry, in the packing industry and in the promotion of course.
Picture I.28: Profi Cutter model DDE
The Super Cutter cut contour with a wire, it shell 3D forms with a hot formed wire lance. You can use material like plastic, wood cardboard and hard foam. All machines of the Super Cutter series are selling with a mobile milling- axis, that is a light milling axis, and with a hand milling machine. Special accessories the client can buy a fixed milling axis, though the spindle axis the control does not vibrate.
Picture I.29: The Super Cutter SC250