The machine is deliver apart construct. That's means that the costumer is installed the machine by himself.
In 6 steps you have install the machine. First is the position of the cross girder. After that you must combine the cross girder to from the bridge. In the third step the running rail is inserting put in. If the work piece carriage is put on the running rail, the wood plates follow. At last the machine must test.
Picture III.33: The installation of the Profi Cutter
Now the Hardware has to install. The conditions are that the user owns a PC with 50MHz, a work memory of 8MB and a free memory of 30MB. So you can install in the PC the Controllercard. If you want to make this you must open the PC. Then the current box is connecting with the card by the ISA -long connection. After that you must install the current box that is need for the wire and the wire is tension in spring force direction.
Though the installation the foam cutting System GmbH delivered a detailed install instruction, technical documentation and a handbook. These helpers are enough for install and operate of the machine.